Add PSU and DMM drivers

src/py_dvt_ate/instruments/drivers/multimeter.py

@@ -0,0 +1,157 @@
+"""Multimeter SCPI driver.
+
+This module implements a client-side driver for digital multimeters
+that communicate via SCPI commands.
+"""
+
+from py_dvt_ate.instruments.drivers.base import BaseDriver
+
+
+class MultimeterDriver(BaseDriver):
+    """SCPI driver for digital multimeters.
+
+    Provides high-level Python API for making measurements with DMMs via
+    SCPI commands. Implements the IMultimeter interface.
+
+    SCPI Commands Used:
+        MEAS:VOLT:DC?      - Measure DC voltage
+        MEAS:CURR:DC?      - Measure DC current
+        CONF:VOLT:DC       - Configure for DC voltage measurement
+        CONF:CURR:DC       - Configure for DC current measurement
+        CONF?              - Query current configuration
+        READ?              - Take measurement with current configuration
+
+    Example:
+        >>> transport = TCPTransport("localhost", 5003)
+        >>> dmm = MultimeterDriver(transport)
+        >>> dmm.connect()
+        >>> voltage = dmm.measure_dc_voltage()
+        >>> current = dmm.measure_dc_current()
+    """
+
+    def measure_dc_voltage(self, range: str = "AUTO") -> float:
+        """Measure DC voltage.
+
+        Configures the meter for DC voltage and takes a measurement.
+
+        Args:
+            range: Measurement range. Default "AUTO" for auto-ranging.
+                  Note: Range parameter currently not supported by simulator.
+
+        Returns:
+            Measured voltage in volts.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If query fails.
+        """
+        # Note: Range parameter not yet implemented in virtual instrument
+        return self.query_float("MEAS:VOLT:DC?")
+
+    def measure_dc_current(self, range: str = "AUTO") -> float:
+        """Measure DC current.
+
+        Configures the meter for DC current and takes a measurement.
+
+        Args:
+            range: Measurement range. Default "AUTO" for auto-ranging.
+                  Note: Range parameter currently not supported by simulator.
+
+        Returns:
+            Measured current in amps.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If query fails.
+        """
+        # Note: Range parameter not yet implemented in virtual instrument
+        return self.query_float("MEAS:CURR:DC?")
+
+    def measure_resistance(self, range: str = "AUTO") -> float:
+        """Measure resistance.
+
+        Configures the meter for resistance and takes a measurement.
+
+        Args:
+            range: Measurement range. Default "AUTO" for auto-ranging.
+
+        Returns:
+            Measured resistance in ohms.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If query fails.
+            NotImplementedError: If instrument does not support resistance.
+        """
+        # Note: Resistance measurement not yet implemented in virtual instrument
+        raise NotImplementedError(
+            "Resistance measurement not yet supported by virtual instrument"
+        )
+
+    def set_integration_time(self, nplc: float) -> None:
+        """Set the integration time.
+
+        Args:
+            nplc: Integration time in number of power line cycles (NPLC).
+                 Typical values: 0.02, 0.2, 1, 10, 100.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If command fails.
+            NotImplementedError: If instrument does not support integration time.
+        """
+        # Note: Integration time not yet implemented in virtual instrument
+        raise NotImplementedError(
+            "Integration time setting not yet supported by virtual instrument"
+        )
+
+    def configure_dc_voltage(self) -> None:
+        """Configure meter for DC voltage measurement.
+
+        Sets the measurement function without taking a measurement.
+        Use read() to take a measurement after configuring.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If command fails.
+        """
+        self.write("CONF:VOLT:DC")
+
+    def configure_dc_current(self) -> None:
+        """Configure meter for DC current measurement.
+
+        Sets the measurement function without taking a measurement.
+        Use read() to take a measurement after configuring.
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If command fails.
+        """
+        self.write("CONF:CURR:DC")
+
+    def get_configuration(self) -> str:
+        """Get the current measurement configuration.
+
+        Returns:
+            Configuration string (e.g., "VOLT:DC", "CURR:DC").
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If query fails.
+        """
+        return self.query("CONF?").strip('"')
+
+    def read(self) -> float:
+        """Take a measurement using the current configuration.
+
+        Must call configure_dc_voltage() or configure_dc_current() first
+        to set the measurement function.
+
+        Returns:
+            Measured value (voltage in V or current in A).
+
+        Raises:
+            ConnectionError: If not connected.
+            IOError: If query fails.
+        """
+        return self.query_float("READ?")