Add default configuration file

config/default.yaml

@@ -0,0 +1,149 @@
+# py_dvt_ate Default Configuration
+# This file contains default settings for the DVT simulation platform.
+# Copy this file and modify values as needed for your environment.
+
+# =============================================================================
+# Instrument Configuration
+# =============================================================================
+instruments:
+  # Backend selection: "simulator" or "pyvisa"
+  # - simulator: Use virtual instruments with physics simulation (for development)
+  # - pyvisa: Connect to real instruments via PyVISA (for production testing)
+  backend: simulator
+
+  # Simulator backend configuration
+  # Used when backend=simulator. Virtual instruments are exposed as TCP servers.
+  simulator:
+    host: localhost
+    thermal_chamber_port: 5001
+    power_supply_port: 5002
+    multimeter_port: 5003
+
+  # PyVISA backend configuration
+  # Used when backend=pyvisa. Provide VISA resource strings for real instruments.
+  # Example: "TCPIP::192.168.1.10::5001::SOCKET"
+  pyvisa:
+    thermal_chamber: null
+    power_supply: null
+    multimeter: null
+
+# =============================================================================
+# Physics Simulation Parameters
+# =============================================================================
+physics:
+  # Physics engine update rate (Hz)
+  # Higher rates provide better accuracy but use more CPU.
+  update_rate_hz: 100.0
+
+  # Thermal model parameters
+  thermal:
+    # Chamber thermal time constant (seconds)
+    # Time for chamber temperature to reach 63% of final value
+    chamber_time_constant_s: 30.0
+
+    # DUT case thermal time constant (seconds)
+    # Time for case temperature to reach 63% of final value
+    case_time_constant_s: 5.0
+
+    # Junction-to-case thermal resistance (°C/W)
+    # How much the junction heats above case per watt dissipated
+    theta_jc: 15.0
+
+    # Case-to-ambient thermal resistance (°C/W)
+    # How much the case heats above ambient per watt dissipated
+    theta_ca: 5.0
+
+  # Thermal chamber behaviour
+  chamber:
+    # Maximum temperature ramp rate (°C/min)
+    # Real chambers have limited heating/cooling rates
+    ramp_rate_c_per_min: 10.0
+
+    # Temperature stability window (°C)
+    # Chamber is considered stable when within ±this value of setpoint
+    stability_window_c: 0.5
+
+    # Stability duration requirement (seconds)
+    # Chamber must remain in stability window for this duration
+    stability_time_s: 30.0
+
+# =============================================================================
+# DUT (Device Under Test) Configuration
+# =============================================================================
+dut:
+  # DUT model type
+  # Currently supported: "ldo"
+  model: ldo
+
+  # DUT model parameters
+  parameters:
+    # Nominal output voltage at 25°C (V)
+    nominal_output_voltage: 3.3
+
+    # Temperature coefficient (ppm/°C)
+    # Voltage change per degree: ΔV = V₀ × tempco × ΔT / 1e6
+    tempco_ppm_per_c: 50.0
+
+    # Quiescent current at 25°C (µA)
+    quiescent_current_ua: 50.0
+
+    # Quiescent current temperature coefficient (per °C)
+    # Iq change per degree: ΔIq = Iq₀ × tempco × ΔT
+    quiescent_current_tempco: 0.003
+
+    # Dropout voltage (V)
+    # Minimum Vin-Vout differential for regulation
+    dropout_voltage: 0.3
+
+# =============================================================================
+# Data Storage Configuration
+# =============================================================================
+data:
+  # SQLite database path for test runs and results
+  database_path: ./data/py_dvt_ate.db
+
+  # Directory for measurement data files (Parquet format)
+  measurements_dir: ./data/measurements
+
+  # Directory for generated reports (PDF, HTML)
+  reports_dir: ./data/reports
+
+# =============================================================================
+# Logging Configuration
+# =============================================================================
+logging:
+  # Logging level: DEBUG, INFO, WARNING, ERROR, CRITICAL
+  level: INFO
+
+  # Log file path
+  # Use null to disable file logging
+  file: ./data/logs/py_dvt_ate.log
+
+  # Log message format
+  # Uses Python logging format strings
+  format: "%(asctime)s - %(name)s - %(levelname)s - %(message)s"
+
+# =============================================================================
+# Dashboard Configuration (Streamlit)
+# =============================================================================
+dashboard:
+  # Enable/disable the Streamlit dashboard
+  enabled: true
+
+  # Dashboard server port
+  port: 8501
+
+# =============================================================================
+# API Configuration (Phase 2)
+# =============================================================================
+api:
+  # Enable/disable the REST API server
+  # Currently not implemented (Phase 2 feature)
+  enabled: false
+
+  # API server host
+  # Use "0.0.0.0" to listen on all interfaces
+  host: "0.0.0.0"
+
+  # API server port
+  port: 8000